Open PDF → · Download HTML (ZIP)
YOOPPEE
CANDY65
Tri-Mode RGB Gaming Mechanical Keyboard
USB wired, 2.4G wireless, and three Bluetooth channels — with a full RGB light bar, low-latency mode, and adjustable sleep timer.
Dress your desk, dress your day!
CANDY65 Core Specs
Everything that matters, in one glance.
Product Type
RGB gaming mechanical keyboard, tri-mode (USB / 2.4G / Bluetooth).
Product Name
CANDY65 Tri-Mode Mechanical Keyboard
Lighting System
RGB light bar with 5 effects + OFF. Brightness, speed, and saturation adjustable (5 speed levels).
Caps Indicator
Caps Lock indicator glows solid white while Caps is on.
Battery
3.7V lithium battery. No battery switch — plug in to charge, unplug to run on battery.
Power Consumption
Working < 250mA · Sleep 1 < 100μA · Sleep 2 < 30μA
65% Layout, Full Confidence
Every key at a glance — modifiers in pink, arrows in blue, and the all-important Fn in gold.
Customize Your Keys with VIA
Download this keyboard's definition file, then load it in VIA to customize your keymap.
Set Up VIA
Connect the keyboard by USB. Open VIA and authorize the device. In Settings, enable Show Design tab; in Design, choose Load Draft Definition and select the downloaded JSON. Return to Configure to remap keys.
This file is for the CANDY65.
Four Channels, Easy Switching
In wireless mode, short-press to switch channels or long-press to pair. The light bar shows each channel's color.
Bluetooth 1 · Blue
Fn + Q
Short: switch · Long: pairBluetooth 2 · Purple
Fn + W
Short: switch · Long: pairBluetooth 3 · Cyan
Fn + E
Short: switch · Long: pair2.4G · Green
Fn + R
Short: switch · Long: pairPairing Tips
The light bar flashes fast while pairing, flashes slowly while reconnecting.
On success, the indicator stays solid for 2 seconds, then returns to the full backlight effect.
Pairing fails after 1 minute with no device found → sleep. Reconnecting fails after 20 seconds → sleep.
No battery switch: plug in the cable and the keyboard auto-switches to wired mode; unplug and the battery takes over.
FN Combo Functions
Hold Fn, then press the matching key.
System
Light Bar Control
Function Keys
Use Fn with the number row to access F1–F12 on this compact layout.
⚡ Low-Latency Mode
Long-press Fn + H for 3s (key debounce switch). The indicator under the H key confirms:
😴 Custom Sleep Timer
Long-press Fn + Y for 3s to cycle sleep time. The indicator under the Y key shows (default: 3 min):
Light Bar Effects
Five effects plus OFF. Switch with Fn + PgUp.
Flowing Wave
A wave of light moves horizontally across the light bar, left to right (default).
Single-Color Flow
A single color streams across the light bar. Default is red.
Slow Color Shift
The light bar shows a solid color that slowly shifts and changes.
SpeedSteady On
The light bar stays lit in one color. Default is red.
Breathing
The light bar gently breathes in one color. Default is red.
OFF
Turns off the light bar for a quiet, focused desk.
Two-Level Smart Sleep
Efficient power states keep you typing longer between charges.
Working State
Current consumption below 250mA.
Sleep Level 1 · 3 min by default
Lights off, wireless stays connected. < 100μA. Any key wakes with instant key output.
Sleep Level 2 · after 10 min idle
Wireless disconnects. < 30μA. First key press wakes and auto-reconnects (no output on the first press); keys output once reconnected.
Battery Level · FN + Space
50% – 100%
Light bar glows green
30% – 50%
Light bar glows yellow
Below 30%
Light bar glows red
Hold Fn + Space to show battery level. Release to restore your lighting effect.
While charging: green flowing = charging, solid green = fully charged.
Low battery: the light bar flashes red at 1Hz — time to charge.
3.7V lithium battery. No battery switch — plug in to charge, unplug to use battery.
CANDY65 On Your Desk
YOOPPEE
Dress your desk,
dress your day!
Thank you for choosing YOOPPEE CANDY65.
May your desk become a little cuter every day.
